Canon imageFORMULA P-215 Service Manual page 74

CHAPTER 5 TROUBLESHOOTING
6) Password dialogue box appears, and
enter six characters as "market" and select
[OK].
Figure 5-203
Note: If "OK" is selected before completing
scanner recognition,
screen below appears. Select "Re-
scan" in a few seconds.
The "Config" screen also appears if
the scanner is not operated correctly,
such as if it is not turned on. Check the
operation procedure.
Figure 5-204
Note: When the Auto Start switch is "ON",
the Auto Play screen appears, but
should be ignored.
Figure 5-205
5-4
the "Config"
COPYRIGHT © CANON ELECTRONICS INC. 2011
7) Service screen appears.
Note: Do not start other application software
while starting the service tool. If it
becomes inoperative,
computer.
Sample error screens are shown be-
low.
Figure 5-206
restart the
CANON P-215 FIRST EDITION