Mitsubishi Electric CITY MULTI PQRY-P200YMF-B Service Handbook page 80

(d) The refrigerant flow is as following figure. Hot gas (high pressured) flows in cooling mode and cool gas/liquid
(low pressured) flows in heating mode. Please refer to the Refrigerant Circuit Diagram.
And, ON/OFF of Solenoid valve is depends on the amount of running indoor units, ambient temperature and so
on. So please check by LED Monitor Display.
The SV coil is taken off, then it is possible to open caps and check plungers. But the special tool which is on the
Service Parts List is needed.
Solenoid Valves
Block
SV3
SV4
➁
HEXA
CV8
* Closed torque : 13kg·m (1.3N·m)
–77–
➀
Distributor
SV6
SV5
➂ ➃ ➅ ➄
HEXB HEXC HEXD HEXE
SV71
CV9 CV10
CV4
CV6
Orifice
CV7
CV5 CV2 CV3