Mitsubishi Electric CITY MULTI PQRY-P200YMF-B Service Handbook page 51

CENTRALLY CONTROLLED
ON OFF
CHECK
CLOCK
˚C
STAND BY INDOOR UNIT ERROR CODE
DEFROST
ADDRESS NO. OA UNIT ADDRESS NO.
CLOCK ON OFF
TEMP. TIMER SET
NETWORK
REMOTE CONTROLLER
PAR-F25MA
2 Press the switch for
confirmation (E)
3) Method of deletion
• Deletion of group registration information of indoor unit ...................................... 4
[Operation procedure]
1 With the remote controller under stopping or at the display of "HO", continuously press the
switch (A + B) at the same time for 2 seconds to change to the registration mode.
2 Press the switch (E) to display the indoor unit address registered. (As same as 2)
3 In order to delete the registered indoor unit being displayed on the remote controller, press the
times continuously. At completion of the deletion, the attribute display section will be shown as " – – ".
(See figure below.)
Note: Completing the deletion of all indoor units registered on the remote controller returns to "HO" display.
4 After completing the registration, continuously press the
seconds to change to the original ordinary mode (with the remote controller under stopping).
CENTRALLY CONTROLLED
ON OFF
CHECK
CLOCK
˚C
STAND BY INDOOR UNIT ERROR CODE
DEFROST ADDRESS NO. OA UNIT ADDRESS NO.
CLOCK ON OFF
TEMP. TIMER SET
NETWORK
REMOTE CONTROLLER
PAR-F25MA
1 Press the switch for confirmation (F)
twice continuously.
ON/OFF –
1Hr.
˚C
FILTER
CHECK MODE
TEST RUN
NOT AVAILABLE
FILTER
CHECK
TEST RUN
1 Set the address
1
ON/OFF –
1Hr.
˚C
FILTER
CHECK MODE
TEST RUN
NOT AVAILABLE
FILTER
CHECK
TEST RUN
• Registered
1 + 2
• No registration
+
FILTER
• Deletion completed
In case group re-
gistration with other
indoor unit is existing
• Deletion completed
1
In case no group
registration with other
indoor unit is existing
–48–
˚C
INDOOR UNIT ERROR CODE
ADDRESS NO OA UNIT ADDRESS NO
(Alternative
display)
˚C
INDOOR UNIT ERROR CODE
ADDRESS NO OA UNIT ADDRESS NO
˚C
INDOOR UNIT ERROR CODE
ADDRESS NO OA UNIT ADDRESS NO
(Alternative
display)
˚C
INDOOR UNIT ERROR CODE
ADDRESS NO OA UNIT ADDRESS NO
˚C
INDOOR UNIT ERROR CODE
ADDRESS NO OA UNIT ADDRESS NO
* Same display will appear when
the unit of "007" is not existing.
˚C
INDOOR UNIT ERROR CODE
ADDRESS NO OA UNIT ADDRESS NO
+
FILTER
CLOCK ON OFF
(F) switch two
switch (A + B) at the same time for 2
˚C
INDOOR UNIT ERROR CODE
ADDRESS NO OA UNIT ADDRESS NO
"– –" indicates the
deletion completed.
˚C
INDOOR UNIT ERROR CODE
ADDRESS NO OA UNIT ADDRESS NO
2
ON/OFF –