Insert Tools, Accessories - Hilti TE 30-A36 Original Instructions Manual

2.10 Li‑ion battery charge status
LEDs light constantly
LED 1,2,3,4
LED 1,2,3
LED 1,2
LED 1
-
NOTE
Indication of the charge status is not possible while the power tool is in operation or immediately after operation.
If the battery charge status LEDs flash, please refer to the information given in section 9. "Troubleshooting".

3. Insert tools, accessories

Designation
Chuck
Chuck
Hammer drill bits
TE‑C percussion core bits
TE‑T percussion core bits
TE‑C forming and installation drill bits
Anchor-setting tools
Quick-release chuck for wood and metal drill bits
Wood drill bits
Metal drill bits
Designation
Pointed chisels
Flat chisel
Shaped chisels
Designation
Charger for Li-ion batteries
Charger for Li-ion batteries
Battery
Dust removal system
LEDs blink
-
-
-
-
LED 1
Description
TE‑C (SDS Plus)
TE‑T (SDS Top)
Ø 6...28 mm
Ø 25...68 mm
Ø 25...68 mm
Ø 10...35 mm
TE‑C or TE‑T connection end
For smooth or hex. shank
Ø 3...25 mm
Ø 3...13 mm
Description
TE‑C or TE‑T connection end
TE‑C or TE‑T connection end
TE‑C or TE‑T connection end
Short designation
C 4/36‑90
C 4/36‑350
B36/6.0 Li‑ion
TE DRS‑S
Charge status C
C ≧ 75 %
50 % ≦ C < 75 %
25 % ≦ C < 50 %
10 % ≦ C < 25 %
C < 10 %
en
21