Remote Voltage/Amperage Control - Red-D-Arc D55OK HO Owner's Manual

6-4. Remote Voltage/Amperage Control

Example: Combination Remote Amperage Control (Stick) With Remote On/Off Control
Set Remote
Set V/A
Adjust Switch Process
Example: Combination Remote Amperage Control (TIG) With Remote On/Off Control
Set V/A Set Remote
Process
Adjust Switch
1
Set Range
Set Range
1 Remote 14 Receptacle RC14
Connect optional remote control to
RC14 (see Section 5-13).
Process = Stick (Using Remote On/Off)
Range = 125 to 400 A DC
Max (400 A DC)
Min (125 A DC)
Control Not Adjust Optional Remote Control
Used In Remote
Stick Mode
Process = TIG (Using Remote On/Off)
Range = 40 to 330 A DC
Percentage Of Range = 50%
Max = About 185 A DC (50% of 40 to 300)
Max (185 A DC)
Min (40 A DC)
Set Control Adjust Optional Remote Control
0774 / Ref. 192 895-A / 804 582-A / 242 336-A
In Example:
Min = 125 A DC
Max = 400 A DC
In Example:
Min = 40 A DC
OM-243 907 Page 33