Installing Exhaust Pipe; Activating The Dry Charge Battery (If Applicable) - Red-D-Arc D55OK HO Owner's Manual

5-6. Installing Exhaust Pipe

Tools Needed:
1/2 in.

5-7. Activating The Dry Charge Battery (If Applicable)

1
4
+
−
OM-243 907 Page 24
3
2
5
OR
5 A
6
30 A
Tools Needed:
!
Stop engine and let cool.
.
Point exhaust pipe in desired di-
rection but always away from front
panel and direction of travel.
Exhaust1 2008−01 Ref. 803 604 / Ref. 202 705
!
Always wear a face shield,
rubber gloves and protective
clothing when working on a
battery.
Remove battery from unit.
1 Vent Caps
2 Sulfuric Acid Electrolyte
(1.265 Specific Gravity)
3 Well
Fill each cell with electrolyte to
bottom of well (maximum).
!
Do not overfill battery cells.
Wait ten minutes and check electro-
lyte level. If necessary, add electro-
lyte to raise to proper level. Reins-
tall vent caps.
4 Battery Charger
!
Read and follow all instruc-
tions supplied with battery
charger.
5 5 Amperes For 30 Minutes
Charge Time
6 30 Amperes For 12 Minutes
Charge Time
Charge battery. Disconnect charg-
ing cables and install battery.
.
When electrolyte is low, add
only distilled water to cells to
maintain proper level.
drybatt 12008−01 − S-0886