Wireless Audio Module - HP ENVY 15 Maintenance And Service Manual

Wireless audio module

Description
Wireless audio module
Before removing the wireless audio module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive (see
Remove the wireless audio module:
1. Disconnect the wireless audio module antenna cables (1) from the terminals on the wireless
audio module.
NOTE:
Main terminal. The wireless audio module "2" antenna cable is connected to the wireless
audio module Aux terminal.
2. Remove the two Phillips PM2.0×2.8 screws (2) that secure the wireless audio module to the
system board. (The wireless audio module tilts up.)
40 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page
Hard drive on page
The wireless audio module "1" antenna cable is connected to the wireless audio module
35).
37).
Spare part number
668115-001
ENWW