Subwoofer - HP ENVY 15 Maintenance And Service Manual

Subwoofer

Description
Subwoofer (includes cables and 2 grommets)
Before removing the subwoofer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Service cover (see
b. Top cover (see
c. Display assembly (see
d. System board (see
e. Top speakers (see
Remove the subwoofer:
1. Remove the six Phillips PM2.0×2.8 screws (1) and the two Phillips PM2.5×6.4 screws (2) that
secure the subwoofer to the base enclosure.
NOTE:
that are installed in the screw holes as indicated in the following illustration.
84 Chapter 4 Removal and replacement procedures
Downloaded from LpManual.com Manuals
Battery on page
WLAN module on page
Top cover on page
Display assembly on page
System board on page
Top speakers on page
When removing the subwoofer, make note of the location of the two rubber isolators (2)
35), and then remove the following components:
42)
47)
56)
72)
69)
Spare part number
668844-001
ENWW