Data Settings - TP-Link M7350 User Manual

4.4.4 Data Settings

You can configure data settings on this page.
Total/Monthly Used: Total/Monthly data used. You can click Correct and input the actual

data amount to correct the data.
Data Limit: You can enable or disable the function of data limit. If enabled, you can set the

data quota and usage alert.
Total/Monthly Allowance: Set the allowed amount of total/monthly data. When data

usage exceeds the allowance, the device will disconnect Internet and display a message
on the screen asking whether to connect Internet.
Usage Alert: Set a percentage of your data allowance. When data usage reaches the alert

percentage, the Internet icon on the screen and web page will change to.
Monthly Data Statistic: You can enable or disable the function of traffic data resetting.

Start Date: Enable the function and schedule a date, the data will reset to zero on the date.

If disabled, total data information is displayed. If enabled, monthly data information is
displayed.
Click Save to save your settings.
M7350 LTE-Advanced Mobile WiFi User Guide
Figure 4-23 Data Settings
-33-