Data Settings - TP-Link Archer MR200 User Manual

Chapter 11

11. 2. Data Settings

Data Settings is used to monitor the data usage of your router in real-time. You can limit
your data usage according to your monthly allowance or total allowance and you will
receive a warning if your data usage reaches the specified level.
Follow the steps below to monitor your data usage.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to
3. Enable
data overuse.
4. Enter the allowed amount of total/monthly data in the
field. When data usage exceeds the allowed level, the router will disconnect from
the Internet and notify you on the
5. Enter a percentage in the
usage reaches the alert level, a warning will be shown on the
Page.
6. Enable
7. Enter the start date of the billing cycle in the
8. Click
Downloaded from www.Manualslib.com
Advanced > Network >
Data Limit to set total/monthly data allowance and usage alert to prevent
Usage Alert
Data Statistics to reset data statistics when the next billing cycle starts.
Save to save the settings.
manuals search engine
Data Settings page.
Basic > Network Map
field to prevent data overuse. When data
Start Date
Specify Your Network Settings
Total/Monthly Allowance
Page.
Basic > Network Map
field.
48