Download  Print this page

TP-Link M7350 Quick Installation Manual

Lte-advanced mobile wifi
Hide thumbs
   

Advertisement

Quick

Installation Guide

LTE-Advanced Mobile WiFi
MODEL NO. M7350
Connecting to the Internet
1
Install the SIM card and battery
Open the cover upwards, and install the SIM card and battery as shown.
S
e t
p
: 1
S
e t
p
: 3
a
b
*
SIM card not provided by TP-LINK.
*
Micro or Nano SIM cards should be converted using provided SIM card trays.
2
Turn on the M7350
Hold the
button until the screen appears as shown below.
(You can also hold the
button until the screen appears "Power
off" to turn off the M7350.)

*Advanced configuration

For advanced configuration, please enter the web-management page:
Open your web browser and type http://tplinkmifi.net or http://192.168.0.1 into the
address bar, then enter the default user name and password: admin, and click Login.
FAQ(Frequently Asked Questions)
FAQ1.
What should I do if I cannot log into the web-management page?
Verify that your device is connecting to the M7350.
Verify that you entered the correct IP address http://tplinkmifi.net or http://192.168.0.1.
Verify that your device is obtaining an IP address automatically.
FAQ2.
What should I do if I cannot access the Internet?
Tip1. Check the LAN connection
Open your web browser and type http://tplinkmifi.net or http://192.168.0.1 in the address bar,
Check if you can log into the web-management page successfully. If not, please refer to FAQ 1
and retry.
Tip2. Check your ISP parameters
1. On your PC, log into the web-management page , choose "Advanced->Dial-up->Dial-up Settings"
to verify the parameters are correct with your ISP. These parameters include APN, User name and
Password.
2. If these settings are not correct, please click Create to create a new profile with the correct
parameters, and then choose the new profile from the Profile List.
Tip3. Check the Mobile Data
1. On your PC, log into the web-management page, choose "Advanced->Dial-up->Dial-up Settings"
to verify that Mobile Data is on.
S
e t
p
: 2
*
Make sure to have
the
triangle notch
outwards.
S
e t
p
: 4
3
Connecting to the Internet
When turned on, the M7350 will boot for a while. You will then see one of the
following messages. Please follow the corresponding instructions.
Establish a Wireless Connection
Search for the Wireless Network name (SSID) and type in the Wireless Password ,
both of which can be found on the screen or rear cover label.
To check the SSID and Password on the screen:
1. Press the MENU button to display the menu.
2. Press the MENU button to scroll to Device Info.
3. Press the
button to enter Device Info.
*We suggest changing the wireless name and password on the web-management
page for your own security.
Enter the PIN Code
1. Open your web browser and type http://tplinkmifi.net
or http://192.168.0.1 in the address bar, then enter the
default user name and password: admin, and click Login.
Enjoy!
2. Enter the correct PIN code according to your ISP, and
click Apply.
Note:
1. If "No Service" appears on your screen, please verify the following
and repeat step
.
3
Verify that your SIM card is an LTE , WCDMA or GSM SIM card.
Verify that your SIM card is in your ISP's service area.
Verify that your SIM card has sufficient credit.
2. If "No SIM Card" appears on your screen, please turn off the
M7350 and repeat steps
2. If the Mobile Data is off, enable it to access the Internet.
Tip4. Check the Data Roaming
1. Please confirm on the screen if you are in roaming service. If roaming, the
on the screen.
2. On your PC, log into the web-management page, choose "Advanced->Dial-up->Dial-up Settings",
and then enable the Data Roaming.
Note: You can also enable the Data Roaming on the screen.
Tip5. Check the Data Limit
1. On your PC, log into the web-management page, choose "Advanced->Data Settings" to verify if the
Total Used has exceeded the Total Allowance.
2. If it is, click Correct and set Total Used to zero. You can also turn off the Data Limit to access
the Internet again.
FAQ3. What should I do if my Internet speed is slow?
Tip1. The 4G network may be in poor condition. Press the MENU button to scroll to Network
Mode, press the
button and try another mode.
Tip2. The 2.4G WiFi network may be interfered. Recommend using the 5G WiFi network if your
devices support it. Press the MENU button to scroll to WiFi 2.4G/5G, press the
and choose the 5G WiFi band.
back
SSID:
TP-LINK_M7350_A4931A
Password:
123456789
Login Name:
http://tplinkmifi.net
~
.
1
3
icon will appear
button

Advertisement

loading

  Also See for TP-Link M7350

  Related Manuals for TP-Link M7350

  Summary of Contents for TP-Link M7350

  • Page 1: Installation Guide

    Install the SIM card and battery Open the cover upwards, and install the SIM card and battery as shown. When turned on, the M7350 will boot for a while. You will then see one of the following messages. Please follow the corresponding instructions.
  • Page 2: Power Saving

    For power saving, you may encounter the two situations below: 1. The screen will turn off automatically after 15 seconds. 2. The WiFi connection will turn off automatically if no WiFi devices connect to the M7350 for 15 minutes. You can simply tap the button or MENU button to recover.