Data Settings - TP-Link Archer MR200 User Manual

Chapter 11

11. 2. Data Settings

Data Settings is used to monitor the data usage of your router in real-time. You can limit
your data usage according to your monthly allowance or total allowance and you will
receive a warning if your data usage reaches the specified level.
Follow the steps below to monitor your data usage.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced
3. Enable
Data Limit
data overuse.
4. Enter the allowed amount of total/monthly data in the
field. When data usage exceeds the allowed level, the router will disconnect from
the Internet and notify you on the
5. Enter a percentage in the
usage reaches the alert level, a warning will be shown on the
Page.
6. Enable Data Statistics
7. Enter the start date of the billing cycle in the
8. Click Save to save the settings.
> Network > Data Settings
to set total/monthly data allowance and usage alert to prevent
Basic
Usage Alert
to reset data statistics when the next billing cycle starts.
Specify Your Network Settings
page.
Total/Monthly Allowance
> Network Map Page.
field to prevent data overuse. When data
Start Date field.
Basic > Network Map
48