TP-Link M7350 User Manual page 36

the best channel automatically. It is not necessary to change the wireless channel unless
you notice interference problems with another nearby access point.
Wireless Mode: This field determines which Wi-Fi network protocol will be used. The

wireless mode list varies with the wireless band. For 2.4GHz wireless band, the wireless
mode can be 11n only, 11bg mixed and 11bgn mixed. For 5GHz wireless band, the
wireless mode can be 11n only and 11an mixed. Without special demands, you are
recommended to select 11bgn mixed (for 2.4GHz wireless band) or 11an mixed (for 5GHz
wireless band) as Wi-Fi mode. To seek the optimal performance of Wi-Fi hotspot, you are
recommended to select the mode that corresponds with your wireless NIC, for instance, if
your NIC supports IEEE802.11n specification, 11n only is recommended.
Wireless Security: You are provided two modes of security here: Unsecured and

WPA-PSK/WPA2-PSK.WPA-PSK/WPA2-PSK is the WPA-PSK/WPA2-PSK authentication
type based on pre-shared passphrase. It's easy to set and secure to use. So it's perfect for
SOHO users.
Wireless Password: You can enter 8~63 ASCII characters (case sensitive) or 64

hexadecimal characters (case insensitive) as your wireless password.
Wi-Fi Auto-disable Time: If no clients connect to the device's wireless network in a period

of time (15 minutes by default), the Wi-Fi will be shut down. You can press the power
button to resume the Wi-Fi. The value 0 indicates that the device never shuts down Wi-Fi
automatically.
Click Save to save your settings.
4.4.2.2. WPS
You can configure WPS on this page.
M7350 LTE-Advanced Mobile WiFi User Guide
-28-