Adjusting The Bottle Rack - Miele KFN 37432 iD Operating And Installation Instructions

Stoppers prevent the shelves from
being dislodged by mistake.

Adjusting the bottle rack

(depending on model)
The bottle rack can be placed at
different positions in the appliance.
^ Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The rear rail must face upwards to
prevent bottles from touching the back
of the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.
Adjusting the interior fittings
Fruit and vegetable drawer
(depending on model)
The fruit and vegetable drawer is on
telescopic runners, and can be
removed for filling, emptying or
cleaning purposes.
^ Pull out the drawer as far as it will go,
and then lift it up and out.
Push the runners back in again to
avoid damaging them.
Fitting the drawer
^ Push the runners in completely and
then place the drawer on them.
^ Push the drawer into the appliance
until it clicks into position.
43