Temperature And Door Alarm; Temperature Alarm - Miele KFN 37432 iD Operating And Installation Instructions

Temperature and door alarm

This appliance has a warning system
which ensures that the temperature in
the freezer section cannot rise
unnoticed and to avoid energy being
wasted if a door is left open.

Temperature alarm

If the temperature in the freezer
section becomes too warm, the sensor
for the freezer section will flash and at
the same time the alarm symbol ; will
flash in the display. An audible alarm
will also sound.
The temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm.
The alarm may sound and the sensor
for the freezer section and the alarm
symbol may flash, for example,
– when you switch the appliance on,
and for as long as the temperature in
a particular section differs from the
temperature set,
– if the freezer door has been left open
for a while, e.g. in order to load, to
re-arrange or to take food out.
– when freezing large amounts of food
at once,
– in the event of a power cut,
– if the appliance has a fault.
The alarm will stop and the alarm
symbol ; will go out when the
temperature reaches the correct level
again. The sensor for the freezer
section will light up again constantly.
32
However, if the temperature in the
freezer section remains above
-18 °C for a long time, check that the
frozen food has not started to
defrost. If it has, check that it is still
safe to use, and if so, use it as
quickly as possible. Defrosted food
may only be re-frozen after it has
been cooked.
Switching the alarm off early
If the noise disturbs you, you can
switch the alarm off early if you wish.
^ Touch the sensor for switching off the
temperature alarm.
The alarm will stop.
The freezer section sensor on the
control panel and the alarm symbol ;
in the display will continue to flash until
the temperature is at the correct level.