Miele KFN 37432 iD Operating And Installation Instructions page 93

^ Tighten all screws again.
^ Replace top cover o, and click it into
place.
^ Replace side covers p, making sure
you hear them click into place.
Building in the appliance
To make sure the appliance is
correctly fitted:
– The doors must close properly.
– The doors must not touch the
housing unit.
– The seals at the top edge of the
handle side must fit properly.
^ To double check place a torch in the
appliance and close the doors.
Turn the lights out in the room. If you
can see any light shining out from the
sides double check the installation.
93