Miele KFN 37432 iD Operating And Installation Instructions page 89

Carry out the following steps on both
doors.
^ A gap of 8 mm is set ex-works
between the appliance door and the
fixing bracket. Double check this gap
and reset it if necessary.
^ Push fitting aids b up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see - on
the diagram).
Building in the appliance
Tip: Push the fitting aids b together
with the furniture front up to the height
adjoining unit furniture doors.
^ Undo nuts c and take fixing bracket
d off together with fitting aids b.
89