Adjusting The Sound - Kenwood KRF-X9070D Instruction Manual

Normal playback

Adjusting the sound

SPEAKER EQ ACTIVE EQ
SPEAKERS
PHONES
% fi
MULTI /
MUTE
LOUD.
SP. EQ
TONE
Adjusting the TONE
You can adjust the sound quality when the receiver is in the PCM
stereo mode, analog stereo mode and when "THX OFF".
1 For the remote control, press and hold the TUNER key for
more than 3 seconds to switch to receiver mode.
• When you use the remote control, press the SUB key to switch
to sub screen mode.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
TONE ON/OFF.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
3 When in TONE ON selection, press the TONE key for the
following displays.
BASS : Select this to adjust the low frequency range.
TREBLE : Select this to adjust the high frequency range.
4 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the
sound quality.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
• The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
• The adjustment item is displayed for approximately 8 seconds.
TONE MULTI CONTROL
MUTE VOLUME
CONTROL
TUNER
RCVR PWR
% fi
VOL /
PTY
ACT. EQ
B. BOOST
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
Once-touch low frequency emphasis (Bass Boost)
(remote control only)
You can adjust the sound quality when the receiver is in the PCM
stereo mode, analog stereo mode and when "THX OFF".
Press the B. BOOST key.
• Press the key once to select the maximum (+10) low frequency
emphasis setting.
• This key does not function when the receiver is in the sound quality
or ambience effects adjustment mode.
Switching back to the previous setting
Press the B. BOOST key again.
Adjusting the LOUDNESS mode (remote control only)
You can adjust the Loudness function which controls the low volume
settings to maintain the music's richness. The adjustment can be
made when the receiver is in the PCM stereo mode, analog stereo
mode and when "THX OFF".
Press the LOUD. key to turn the LOUDNESS setting ON.
To cancel
Press the LOUD. key again so that the "LOUDNESS" indicator
goes off.
Muting the sound
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
Blinks
SP
A B
L C SW R
LFE
SL S SB SR
RDS
RTY
AUTO
MEMO
To cancel
STEREO
TUNED
Press the MUTE key again so that the "MUTE" indicator goes off.
• MUTE ON can also be deactivated by turning the VOLUME
CONTROL knob or pressing VOL %/fi keys.
RDS
RTY
AUTO
MEMO
STEREO
TUNED
CIN
MUTE OPTICAL 6CH INPUT
AUTO DETECT
AC
CLIP
COAXIAL ANALOG 96kHzfs DS
RDS
THX
RTY
AUTO
MEMO
STEREO
TUNED
27
EN