Names and functions of parts
1 IR (infrared) indicator
The segments turn on and off to show signal
transmission.
2 SRC PWR (source power) key
Use to turn the other components on or off.
3 TV PWR (power) key
Use to turn the TV on or off.
4 OSD (on screen display) key
Use to operate the DVD component.
GUIDE key
Use to operate other components.
C. SEARCH (category search) key
Use to operate other components.
5 TOP MENU key
Use to operate the DVD component.
SETUP key
Use to select the speakers' settings etc.
CH SCAN (channel scan) key
Use to operate other components.
6 +100 key
Use to select the disc number with the multi-
CD player.
TV MUTE key
Use to temporarily mute the TV sound.
7 LISTEN MODE 5/∞ keys
Use to select the listening mode.
PAGE 5/∞ keys
Use to operate the DVD component.
8 CH %/fi keys
Use to select the channels.
¢/4 keys
When in CD, MD and DVD player operations,
these keys function as skip keys.
9 MAIN/SUB key
Use to change between the main screen and
the sub screen.
"MAIN" illumination:Lights when sub screen
mode is activated
"SUB" illumination :Lights when main screen
mode is activated
0 3/8 key
If CD is selected as the input source, this key
functions as the play/pause key.
If MD or TAPE key is selected as input source,
this key functions as the play key.
SP. EQ (speaker equalizer) key
Use to select SPEAKER EQ's setting.
BAND key
Use to select the broadcast band.
! 8 key
Use to operate other components.
STEREO key
Use to switch the listen mode to STEREO.
DIMMER key
Use to adjust the brightness of the display.
@ LAST CH. (last channel) key
Use to operate other components.
AME key
Use to operate other components.
# 2 key
If Tape is selected, this key functions as
‚
reverse play key.
INFO./DISP. (information/display) key
Use to operate other components.
FLIP key
Use to operate the DVD component.
$ DISC SEL. (disc selection) key
Use to operate other components.
TONE key
Use to switch the status of TONE control.
INPUT SEL. (input selection) key
Use to operate other components.
% TV Input key
Use when in TV operation.
^ TAPE A B display
£
Use to display Tape A or Tape B system's
setup.
& Source keys (DVD/6CH, TUNER, CD/DVD,
VIDEO1, VIDEO2, VIDEO3, MD/TAPE, TV,
AV AUX, PHONO)
When press and hold for more than 3 seconds,
they are used to select the registered
components.
‡
Input Selector keys (DVD/6CH, TUNER, CD/
DVD, VIDEO1, VIDEO2, VIDEO3, MD/TAPE,
TV, AV AUX, PHONO)
When press and release in less than 3
seconds, they are used to select the input
sources.
* RCVR PWR (receiver power) key
Use to turn the receiver on or off.
( RETURN key
Use to operate other components.
EXIT key
Use to operate other components.
DIRECT key
Use to operate other components.
) MENU key
Use to operate other components.
MODE key
Use to operate other components.
SOUND key
Use to adjust the sound quality and the
ambience effects.
¡ Numeric keys
¶
Provide functions identical to those of the
original remote control supplied with the
º
component you are controlling.
MULTI (multi control) %/fi/@/# keys
Use to control a variety of settings.
‡
Use to operate other components.
P.CALL @/# keys
‡
Use to receive preset stations in order.
ENTER key
Use to operate other components.
™ +10 key
Use as numeric key function.
£ VOL %/fi keys
Use to adjust the receiver's volume.
¢ MUTE key
Use to temporarily mute the sound.
∞ 1/¡ keys
If CD, MD or Tape is selected as the input
source, this key functions as search keys.
LOUD. (loudness) key
Use to switch the status of LOUDNESS.
¶
ACT. EQ (active equalizer) key
Use to select ACTIVE EQ's setting.
TUNE – /+ keys
Use to operate the tuner mode.
§ ÷ key
If VCR is selected, this key functions as
record key.
B. BOOST (bass boost) key
Use to select the maximum adjustment
setting for the low frequency range.
LANG. (language) key
‚
Use to operate other components.
¶ 7 key
If CD, MD, or TAPE is selected as the input
source, this key functions as the stop key.
DSP MODE key
Use to select any of the DSP mode.
§
AUTO key
Use to select the auto or manual tuning
mode.
• SEEK key
£
Use to operate other components.
THX key
Use to switch the status of THX.
TV/SAT key
Use to operate other components.
ª TV VOL %/fi keys
Use to adjust the TV's volume.
º DISC SKIP key
If CD is selected as the input source, this key
functions as the multi-CD player disc skip
key.
INPUT M. (input mode) key
‡
Use to switch between the full auto, digital
and analog inputs.
BYPASS A/B key
‚
If TAPE is selected as the input source, this is
A and B deck of a double cassette deck.
Use to operate other components.
⁄ LEARN key
Use to memorize the operation of the other
£
remote controls.
¤
(brightness) key
Use to change the brightness of the remote
⁄
control screen to toggle between current
screen and brightness screen.
CH %/fi keys will be used to adjust the
brightness between 5 settings.
§
¶
¶
¶
¶
fi
º
fi
‚
9
EN