Adjusting The Sound - Kenwood KRF-V7070D Instruction Manual

Normal playback

Adjusting the sound

SPEAKER EQ ACTIVE EQ
A SPEAKERS B TONE
PHONES LOUDNESS
TUNER
Tone
Active EQ
Adjusting the TONE
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode.
1 For the remote control, press and hold the TUNER key for more
than 3 seconds to switch to receiver mode.
2 Press the TONE key to select the TONE mode.
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
TONE ON/OFF.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
4 When in TONE ON selection, press the TONE key for the following
displays.
BASS : Select this to adjust the low frequency range.
TREBLE : Select this to adjust the high frequency range.
5 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
sound quality.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
• The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
• The adjustment item is displayed for approximately 8 seconds.
MULTI CONTROL
MUTE VOLUME
CONTROL
POWER RCVR
(Multi %/ fi)
Mute
VOL /
Bass Boost
Loudness
Speaker EQ
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
ACTIVE EQ. MATRIX
RTY
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
Once-touch low frequency emphasis (BASS BOOST)
(remote control only)
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo modes.
Press the Bass Boost key.
• Press the key once to select the maximum (+10) low frequency
emphasis setting.
• This key does not function when the receiver is in the sound quality
or ambience effects adjustment mode.
Switching back to the previous setting
Press the Bass Boost key again.
Adjusting the LOUDNESS mode
You can adjust the Loudness function which controls the low volume
settings to maintain the music's richness. The adjustment can be made
when the receiver is in the PCM stereo and analog stereo mode.
Press the LOUDNESS key to turn the LOUDNESS setting ON.
To cancel
Press the LOUDNESS key again so that the "LOUDNESS"
indicator goes off.
Muting the sound
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
To cancel
Press the MUTE key again so that the "MUTE" indicator goes off.
• MUTE ON can also be deactivated by turning the VOLUME
RDS
CONTROL knob or pressing VOL +/– keys.
RTY
AUTO
MEMO
STEREO
TUNED
ACTIVE EQ mode
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in PCM and
analog stereo mode.
Press the ACTIVE EQ key for the following selections;
1 ACTIVE EQ MUSIC
2 ACTIVE EQ CINEMA : Effective when watching a movie.
3 ACTIVE EQ TV
4 ACTIVE EQ OFF
• "ACTIVE EQ" will scroll from right to left.
• When ACTIVE EQ and SPEAKER EQ are OFF and ACTIVE EQ
(MUSIC) is turned ON, SPEAKER EQ (SMALL) will turn ON
automatically.
• ACTIVE EQ function will not be available when REC MODE, AUTO
TUNING or PRESET MEMORY is ON, and during 96kHz LPCM
playback.
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
Blinks
: Effective when listening to music.
(The ACTIVE EQ indicator lights up.)
(The ACTIVE EQ indicator lights up.)
: Effective when watching TV.
(The ACTIVE EQ indicator lights up.)
: The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ indicator goes off.)
21
EN