Surround Play - Kenwood KRF-X9070D Instruction Manual

Kenwood audio video surround receiver instruction manual vr-7080, krf-x9070d
Hide thumbs Also See for KRF-X9070D:
Table of Contents

Advertisement

Ambience effects

Surround play

The DTS compatible models can reproduce a CD, DVD, or LD carrying
the DTS mark.
DOLBY DIGITAL can be used when playing DVD or LD software
bearing the
mark and DOLBY DIGITAL format digital
broadcasts (etc.). DOLBY PRO LOGIC can be used when playing
video, DVD, or LD software bearing the
SRS Circle Surround II enables you to listen to multi channel sound
from the stereo source.
THX
DSP
Input Selector
SUB
DSP MODE
INPUT M.
Preparations
• Turn ON related components.
• Complete "Preparing for surround sound" (speaker settings).
• Use the Input Selector keys to select the component you wish to play
back with surround sound.
• Use the INPUT MODE key to select the input mode (analog or digital)
for the source you wish to play back.
• Noise will be produced when a DTS source is played by selecting the
analog input.
1
Start playing the video software.
• When you use the remote control, press the SUB key to switch to sub
screen mode .
2
Use the LISTEN MODE knob or LISTEN MODE 5 / ∞ keys to
select the listening mode.
The listening mode settings are stored separately for each input. If
the input mode is set to full auto ("AUTO DETECT" lights), the
receiver selects the optimal listening mode automatically based on
the type of input signal and the speaker settings.
Each turn of the LISTEN MODE knob or press of the LISTEN
MODE 5 / ∞ keys switches the setting as listed.
The listening mode settings are different depending on the type
of input signal.
mark.
INPUT MODE
LISTEN MODE
Input Selector
LISTEN MODE
PTY
5/ ∞
THX
When the DOLBY DIGITAL or DOLBY DIGITAL EX signal is
input :
(The DOLBY DIGITAL or PRO LOGIC, indicator lights up.)
1 DOLBY DIGITAL
2 DOLBY D EX
3 PLII MOVIE
4 PLII MUSIC
5 PRO LOGIC
6 STEREO
When you select DOLBY DIGITAL
"DOLBY DIGITAL" will be displayed.
SP
A B
L
C
SW
R
LFE
SL
SB
SR
When the DTS or DTS-ES (matrix or discrete) signal is
input :
1 DTS
2 DTS-ES MATRIX
3 DTS-ES DISCRETE : (DTS and DISCRETE indicators light up.)
4 STEREO
When the analog signal or the digital signal (except for
DOLBY DIGITAL or DTS signal) is input :
1 PLII MOVIE
2 PLII MUSIC
3 PRO LOGIC
4 NEO:CINEMA : NEO:6 surround.
5 NEO:MUSIC : NEO:6 surround.
£
6 CSII CINEMA : CS 6.1 surround.
0
7 CSII MUSIC : CS 6.1 surround.
8 CSII MONO : CS 6.1 surround.
9 STEREO
• Dolby Digital or DTS signal having more channels than the maximum
number of playback channels available using the receiver's current
settings is input, downmixing is performed to match the number of
available channels.
3
DSP mode (Digital Signal Processor).
DSP can produce these effects without spoiling the sound quality
of the original music or video source.
1 Pressing the DSP key or DSP MODE key will display the
current DSP MODE status.
2 Each press of the key will switch to the next status as shown
bellow:
1 ARENA
2 JAZZ CLUB
3 THEATER
4 STADIUM
5 DISCO
• The DSP mode selection is displayed for approximately 3
seconds.
: DOLBY DIGITAL surround.
: DOLBY DIGITAL EX surround.
: PRO LOGIC II surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround PRO LOGIC
mode.
(The PRO LOGIC indicator lights up.)
: Normal stereo playback.
MUTE
OPTICAL 6CH INPUT
CINEMA EQ.
DTS.
AUTO DETECT
DOLBY DIGITAL
ACTIVE EQ.
MATRIX
CLIP
PRO LOGIC
COAXIAL
ANALOG
96kHzfs
DSP MODE
DISCRETE
: (DTS indicator lights up.)
: (DTS and MATRIX indicators light up.)
: Normal stereo playback.
: PRO LOGIC II surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround PRO LOGIC mode.
(The PRO LOGIC indicator lights up.)
(The NEO:6 indicator lights up.)
(The NEO:6 indicator lights up.)
(The CS II indicator lights up.)
(The CS II indicator lights up.)
(The CS II indicator lights up.)
: Normal stereo playback.
(The STEREO indicator lights up.)
: DSP surround ARENA mode.
: DSP surround JAZZ CLUB mode.
: DSP surround THEATER mode.
: DSP surround STADIUM mode.
: DSP surround DISCO mode.
Continued to next page
RDS
STEREO
NEO:6
THX
RTY
Surround EX
LOUDNESS
CSII
AUTO
MEMO
STEREO
TUNED
35
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr-7080Vr-7080a

Table of Contents