Using The Display Key - Kenwood KRF-V7300D Instruction Manual

2
While the "PTY" indicator is lit, use [P.CALL
4/¢] to select the program type of your choice.
Program type Display
Pop Music "Pop M"
Rock Music "Rock M"
Easy Music "Easy M"
Light Classical Music "Light M"
Serious Classical Music "Classics"
Other Music "Other M"
News "News"
Current Affairs "Affairs"
Information "Info"
Sport "Sport"
Education "Educate"
Drama "Drama"
Culture "Culture"
Science "Science"
Varied Speech "Varied"
3
Press [ENTER] to start searching.
Example: Searching for a Rock Music broadcast.
Display while searching.
Program type name display
Display when a station is received.
Station name display
No sound is heard while "PTY" is blinking.
If the desired program type cannot be found, "No Program"
is displayed, then after several seconds the display returns
to the original display.
To select another program type
Repeat steps 1, 2 and 3.
• [MULTI CONTROL 2/3] can also be use to select a station.
Program type Display
Weather "Weather"
Finance "Finance"
Children's Program "Children"
Social Affairs "Social"
Religion "Religion"
Phone In "Phone In"
Travel "Travel"
Leisure "Leisure"
Jazz Music "Jazz"
Country Music "Country"
National Music "Nation M"
Oldies Music "Oldies"
Folk Music "Folk M"
Documentary "Document"
Blinks
Goes out

Using the DISPLAY key

¶ Operation available only on the remote control unit.
DISPLAY
Pressing [DISPLAY] changes the contents of the
display.
Each press switches the display mode as follows:
1 PS (Program Service) name display
2 RT (Radio Text) display
3 Frequency display
1 PS (Program Service) name display:
The station name is displayed automatically when an RDS
broadcast is received.
If no PS data was sent, "No PS" is displayed.
2 RT (Radio Text) display:
Text data accompanying the RDS broadcast scrolls across
the display. "No RT" or "RT----" is displayed if the current
RDS station does not provide RT data.
3 Frequency display:
Displays the frequency of the current station.
59
English