How To Read This Manual - Kenwood KRF-V7300D Instruction Manual

How to read this manual

The operating instructions given in this manual assume that the user mainly operates the receiver using the remote control unit. When the
same operation is also available on the main unit, the operating method is indicated in illustrations.
The [VOLUME CONTROL], [MULTI CONTROL] and [INPUT SELECTOR] knobs on the main unit are operated by turning the knobs clockwise
or counterclockwise.
Speaker setup
–"Manual Setup"–
Manual Setup is used to set up the speakers manually or to
modify the setups made with Auto Setup. dify the setups made with Auto Setup.
SETUP
ENTER
MULTI CONTROL
/ / /
Speaker configuration –"SP Setup"– Speaker configuration –"SP Setup"–
Select the use of each speaker and its size.
1
Enter the Manual Setup mode.
[SETUP]
Use [MULTI CONTROL 2/3] to select "Manual Setup".
[ENTER]
2
Se ect S Setup . Select "SP Setup".
[MULTI CONTROL 2/3]
[ENTER]
3
Select the use and size of each speaker.
Use [MULTI CONTROL 2/3] to select the speaker.
Use [MULTI CONTROL 5/∞] to set its use or size.
Repeat the above operations until all of the speakers
have been set up.
Speaker Display
"SUBW On"
Subwoofer
"SUBW Off"
"FRNT Large"
Front speaker
"FRNT Normal"
• In this manual, KRF-V9300D is used for the illustrations of front panel and rear panel.
• The illustrations of the main unit display panel and the examples of operations are shown for the purpose of explanation and may differ from
the actual view or operation.
6
KRF-V9300D/KRF-V8300D/KRF-V7300D
The knob on the main unit
is pointed with an arrow to
indicate that it can be turned
in either direction.
The keys and controls used in
the operations described in each
section are indicated with their
names.
The descriptions of the functions
available only on the remote
control unit are accompanied only
with the illustration of the remote
control unit. The descriptions of
the functions available only on the
main unit are accompanied only
with the illustration of the main
unit.
The names of the operated keys
are enclosed inside brackets.
This icon indicates supplementary
information, restrictions in
operation or tips on operation.
Setting
Subwoofer is connected.
When a key is used to select
Subwoofer is not connected.
an option, the list of options is
Large size front speaker
shown in the form of a table.
Average size front speaker
This icon indicates that the
Continued
description continues on the
next page.
Playback
VOLUME CONTROL
INPUT SELECTOR AV AUX/iPod
VOLUME
Input source keys
1
Select the source.
Use the Input source keys on the remote control unit to
select a source.
Or use [INPUT SELECTOR] knob or [AV AUX/iPod] key on
the main unit.
2
Start playback from the selected source.
The iPod can be controlled from this unit. (See <iPod
control> i.)
3
Use [VOLUME %/fi] to adjust the volume.
e t
4
Enjoy various surround effects.
You can enjoy a variety of listen modes. (See <Surround
play using the listen mode> Q.)
The surround effects can be fine tuned according to the
selected input source. (See <Adjustments according to
the playing source> „.)
• The AV AUX and iPod inputs cannot be selected with the [INPUT
SELECTOR] knob of this unit. These inputs should be selected
using the [AV AUX/iPod] on this unit or the [AV AUX] or [iPod] key
on the remote control unit.
/