Table of Contents
Advertisement
Listening to radio broadcasts
2
Press the MEMORY key while receiving the station.
Proceed to step 3 within 20 seconds.
(If more than 20 seconds elapse, press the MEMORY key again).
3
Use the MULTI CONTROL knob or Multi % / fi keys to select
one of the station presets (1 – 40).
4
Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the previous station
will be replaced by the new one.
Receiving preset stations
TUNER
¢
4
1
Press the TUNER key to select tuner as the source.
2
Enter the number of the preset station you want to receive (up
to "40").
Press the Numeric keys in the following order:
For "15", press ................................ 0, 5
For "20", press ................................ 0, 0, )
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
Receiving preset stations in order
TUNER
¢
4
1
Press the TUNER key to select tuner as the source.
22
EN
Blinks for 20 seconds
Numeric keys
+
+
+
(P.Call)
P.Call
@ / #
+
+
+
2
Use the P.Call @¥# keys to select the desired station.
• Each time you press the key, another preset station is received in
order.
Pressing the P.Call # does the following:
Pressing the P.Call @ does the following:
Holding down the P.Call # or @ key, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
Using the RDS Disp.
RDS Disp.
Pressing the RDS Disp. key changes the contents of the display.
Each press switches the display mode as follows:
1 PS (Program Service name) display
2 RT (Radio Text) display
3 Frequency display
1 PS (Program Service name) display:
The station name is displayed automatically when an RDS broadcast
is received.
If no PS data was sent, "NO PS" is displayed.
2 RT (Radio Text) display:
Text data accompanying the RDS broadcast scrolls across the display.
"NO RT" or "RT----" is displayed if the current RDS station does not
provide RT data.
3 Frequency display:
Displays the frequency of the current station.
key
(Display)
+
+
¢
4
+
Hide quick links:
Advertisement
Table of Contents
