Kenwood KRF-V7300D Instruction Manual page 13

Operation Operation
Operate the remote control unit by pointing it to the remote
sensor of this unit.
When this unit is in standby mode (which is indicated by lighting
of the standby indicator), pressing the [ON] key turns this unit ON.
Pressing the [STANDBY] key turns this unit OFF (standby mode).
When operating the connected components, always press
the input source key of the component you need to operate
first to swith the remote control unit to the selected input
source mode, and then press the keys of the corresponding
operation.
Operating range (Approx.)
Standby indicator
STANDBY
Remote sensor
ON
13
English