Krf-V7300D Speaker Setup -"Easy Setup - Kenwood KRF-V7300D Instruction Manual

KRF-V7300D Speaker setup –"Easy Setup"–
The speaker settings can be completed by simply selecting the
room type and listening position. The audio will be corrected
automatically according to the characteristics of the speaker
system in use.
If more detailed speaker settings are required, use the procedure
in <Speaker setup –"Manual Setup"–> fl.
EASY SETUP
ENTER
MULTI CONTROL
/
1
Press [EASY SETUP] to enter the easy setup mode.
2
Set the listening room size.
Use [MULTI CONTROL ∞/5] to select your room type.
[ENTER]
Reference for listening room size
4m (13'1-7/8")
3m (9'10-3/8")
2
12m 24m
Small Medium
5m (16'5-3/8")
2 2
35m
Large
3
Select the listening position.
Use [MULTI CONTROL ∞/5] to select your listening
position.
[ENTER]
Reference for listening position
Front
Center
Rear
The speakers are set up as shown below.
Subwoofer :
\ ON
Front speaker:
\ "FRNT Normal" in <Speaker configuration –"SP
Setup"–> of manual setup
Center speaker:
\ "CNTR Normal" in <Speaker configuration –"SP
Setup"–> of manual setup
Surround speaker:
\ "SURR Normalx2" in <Speaker configuration –"SP
Setup"–> of manual setup
Surround Back speaker:
\ "SB Normal" in <Speaker configuration –"SP Setup"–
> of manual setup
Subwoofer Re-mix :
\ ON
For details on the setting contents, see <Speaker setup
–"Manual Setup"–> fl.
• Easy setup with may not be appropriate with certain speaker
systems or listening environment. In this case, go through
<Speaker setup –"Manual Setup"–> fl.
• Easy setup can set only the 7.1 channel system. If the setup for
the 5.1-channel or 6.1-channel system is required, go through
<Speaker setup –"Manual Setup"–> fl.
31
English