Setup; Setup Menu And Its Operations - Kenwood KRF-V7300D Instruction Manual

Setup menu and its operations

KRF-V9300D/KRF-V8300D:
AUTO ROOM EQ
KRF-V7300D:
EASY SETUP

SETUP

ENTER
MULTI CONTROL
Setup Menu
KRF-V7300D "Easy Setup"*
only
"Auto Setup"
KRF-V9300D
and
KRF-V8300D
only
"Manual Setup"
"Subw Re-Mix"
"Crossover"
"LFE Level"
"Assignment"
"Audio Delay"
Common for
"HDMI Input"
all models
"HDMI Setup"
"TV Audio In"
"Setting Lock"
"Exit"
* The Easy Setup mode cannot be initiated with the [SETUP] key. Use [EASY SETUP] key.
To exit the setup menu
Select "Exit" in the setup menu or press [SETUP] while in the setup mode.
30
KRF-V9300D/KRF-V8300D/KRF-V7300D
1
Press [SETUP] to enter the setup mode.
KRF-V9300D and KRF-V8300D :
The "Auto Setup" mode can also be initiated by pressing the [AUTO ROOM EQ] key.
KRF-V7300D :
For Easy Setup mode, press the [EASY SETUP] key.
2
Use [MULTI CONTROL 2/3] to select an item and press [ENTER].
If a submenu is opened, select one of its items with the same procedure.
3
Perform setup by referring to the page describing the selected item.
/
Submenu
"Room EQ"
"Calibrate"
"Confirm"
"Return"
"SP Setup"
"SP Level"
"SP Distance"
"Return"
"Audio Out"
"Audio Delay"
"HDMI Link"
"Return"
Setting details
The speaker setup is possible by simply selecting the listening room size and the
listening position. If a finer setup is required, please use "Manual Setup".
Sets whether or not the equalizer curve obtained with "Auto Setup" is used.
Measures and analyzes the properties of the speakers and listening room.
Confirms the results of Auto Setup.
Returns to the setup menu.
Selects the use of each speaker and its size.
Adjusts the speaker output levels.
Sets the distance between each speaker and the listening position.
Returns to the setup menu.
Mixes the bass tone of other channels to the subwoofer channel.
Sets the lower limit of the bass frequencies reproduced from the speakers set to "Normal" in
the "SP Setup". The frequencies below the frequency set here are distributed to other speakers
(those set to "Large" and the subwoofer).
Adjusts the bass tone in reproduction of Dolby Digital and DTS sources.
Assigns the input source to the signal output at the CD (ASSIGNABLE) terminal on the rear
panel.
Adjusts the deviation in time between the video and audio.
Enables or disables the HDMI input. Enabling the HDMI input makes it possible to use the
variety of HDMI functions.
Sets whether the HDMI audio input is output from the speakers connected to this unit or from
the TV.
Adjusts the deviation in time between the HDMI video and audio.
Switches the HDMI control functions ON/OFF. Setting this item to ON makes it possible to
interlock the power of the TV and this unit (Power Control) and to control the volume of this
unit from the TV (TV Control).
Returns to the setup menu.
Setting this item to ON makes it possible to enjoy digital surround broadcasting, etc. in the
surround environment. When this is set to ON, the input selector of this unit is automatically
switched to "OPT 1" when the input of the TV is switched.
Locks the setups of this unit.
Exits the setup menu.
page
⁄
fi
¤
¤
fl
‡
‡
°
°
°
·
·
‚
q
q
q
w
w