Receiving Preset Stations In Order; Using The Rds Disp. (Display) Key - Kenwood KRF-V5100D Instruction Manual

Listening to radio broadcasts

Receiving preset stations in order

TUNER
P.CALL
4 / ¢
1
Press the TUNER key to select tuner as the source.
2
Use the P.CALL 4¥¢ keys to select the desired station.
• Each time you press the key, another preset station is received in
order.
Pressing the P.CALL ¢ does the following:
Pressing the P.CALL 4 does the following:
Holding down the P.CALL ¢ or 4 key, lets you skip through
the presets, receiving each preset station at 0.5 second intervals.
24
EN
Using the RDS DISP.
(P.CALL)
Pressing the RDS DISP. key changes the contents of the display.
Each press switches the display mode as follows:
1 PS (Program Service name) display:
The station name is displayed automatically when an RDS broadcast
is received.
If no PS data was sent, "NO PS" is displayed.
2 RT (Radio Text) display:
Text data accompanying the RDS broadcast scrolls across the display.
"NO RT" or "RT----" is displayed if the current RDS station does
not provide RT data.
3 Frequency display:
Displays the frequency of the current station.
(Display)
RDS DISP.
1 PS (Program Service name) display
2 RT (Radio Text) display
3 Frequency display
key