Digital Connections - Kenwood KRF-V5050D Instruction Manual

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable
of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode
settings" section carefully.
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2/MONITOR jacks. (See "Connecting video components".)
PLAY IN REC OUT PLAY IN
L
MONITOR
OUT
DVD VIDEO 1
R
75µs
AM 10kHz
FM 100kHz
50µs
AM 9kHz
FM 50kHz
DE-
EMPHASIS
CHANNEL
SPACE
DVD
VIDEO 2/MONITOR CD/DVD
OPTICAL
COAXIAL
DIGITAL IN
Optical fiber
cable
COAXIAL
DIGITAL
OUT
(AUDIO)
RF digital
demodulator
(DEM-9991D)
(sold separately)
DOLBY DIGITAL RF
OUT (AUDIO)
9
VIDEO 1
B
R L
R L
A
R L C
OPTICAL DIGITAL OUT (AUDIO)
CD player
COAXIAL DIGITAL OUT (AUDIO)
Component with a DTS, Dolby
Digital, or PCM COAXIAL
DIGITAL OUT
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
PCM OUT
LD player
Setting up the system
!
13