Connecting A Dvd Player (6-Channel Input) - Kenwood KRF-V5050D Instruction Manual

Connecting a DVD player (6-channel input)

12
If you have connected a DVD player to the receiver with digital connection, be sure to read the "Input
mode settings" section carefully.
To switch the speakers off , press the MUTE key.
CAUTION (Except for U.S.A. and Canada)
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
• Do not place any objects impairing heat radiation onto the top of unit.
• Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below.
Top panel : 50 cm
CAUTION (For U.S.A. and Canada)
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
• Do not place any objects impairing heat radiation onto the top of unit.
75µs
AM 10kHz
FM 100kHz
50µs
AM 9kHz
FM 50kHz
DE-
EMPHASIS
CHANNEL
SPACE
VIDEO
VIDEO 2 IN CD/DVD
IN
DVD
MONITOR
VIDEO 1
OUT
OUT
VIDEO 1 IN
VIDEO OUT FRONT
(Yellow RCA OUT L/R
pin cord)
DVD player
S VIDEO
OUT
Side panel : 10 cm Back panel : 10 cm
9
PLAY IN REC OUT PLAY IN PLAY IN PLAY IN
MONITOR
OUT DVD VIDEO 1 VIDEO 2 VIDEO 3
VIDEO 1
R
A
R L C
(Except for VR-505/KRF-V5550D)
L
CENTER DVD
R
SUB VIDEO 2/MONITOR
WOOFER COAXIAL
FRONT SURROUND
DVD/6CH. INPUT
SURROUND
OUT L/R CENTER OUT
SUBWOOFER OUT
COAXIAL
DIGITAL
OUT
(AUDIO)
Setting up the system
B
R L
R L
PLAY IN
DVD
S VIDEO cord