Eject a stack manually
Eject a stack manually
Eject a stack
When you press the eject button on the stack‐
er
1x
The eject button on the stacker control panel
blinks slowly (green).
2x
The eject button on the stacker control panel
blinks fast (green).
NOTE
To stop a job competely, you must use the Stop button on the printer control panel.
16
Chapter 3 - Basic instructions
Then
The stack will be ejected on the next possible
set boundary. Then the filling of the stacker
continues.
Therefore, the stack will usually contain com-
plete sets.
The stack will be ejected as soon as possible.
Then the filling of the stacker continues.
Therefore, the stack can contain incomplete
sets.
Canon High Capacity Stacker-G1