Connecting The System Control - Kenwood VR Series Instruction Manual

Connecting the system control
VERON SEeIORY
Connecting system controi cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system controi operations. :
There are two KENWOOD system control mades. Make connec-
tions according to the groups of terminal symbols shown below.
LX$8) Mode : iets you combine (XS), XSB), and XU terminals
(SLT) Mode : for (LIB) terminais only
This unit is compatible with both [XS8] and [SL16] modes. It comes
from the factory set to the [SL16] mode. To switch to the [XS8} mode,
follow the instructions in "SWITCHING FROM [SL 16] TO [XS8]" below.
lla land SYSTEM CONTROL
Ce = cord
Cup OB)
SYSTEM CONTROL
cai ee betes switch
EXAMPLE: [XS8] mode connections
The underlined portion represents the setting of the system contro!
mode.
[SL16] (XS8] Receiver
{[SL16] MD recorder
SYSTEM
[SL16] [XS] [XS8] [XR} Cassette deck CONTROL
cord
{SL16] [XS] [XS8} CD player
EXAMPLE: [SL16] mode connections
The underiined portion represents the setting of the system control
mode .
[XS] | Record player |
[SL16} [XS] [XS8] [XR] SYSTEM
CONTROL
cord
* In order to take advantage of the system control operations. the
components must be connected to the correct jacks. To use aCD
player it must be connected to the CD jacks. Touse a cassette déck
(or MD recorder) it must be connected to the MD/TAPE jacks. When
using more than one CD player (etc.} only the one connected to the
specified jacks may be connected for systern control.
* Some CD players and cassette decks are not compatible with the
{SL16] system control mode. Be- sure to use the [XS8] system
control mode when making system connections with equipment
that is not [SL16] compatible.
* Somé MD players aré not system control compatible. You cannot
make system control connections to this kind of equipment.
VA/KAF-V SERIES (En/KM)
Notes ,
1. [SL16] equipment cannot be combined with [XR], [XS], and [X$8]
equipment far system operations. If your equipment consists of this
kind of combination, ptease do not connect any system control
cords. Even without system control cords, normal operations can
be carried out without effecting performance.
2.Do not connect system control cards to any components other than
those specified by KENWOOD. It may cause a malfunction and,
damage your equipment.
3. Be sure the system control plugs are inserted all the way in 40 the
system contro} terminals.
Do not connect a system contro! cord to a cassette deck con-
nected.to the MONITOR jacks.
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate this unit with the system remote supplied with the
receiver.
Automatic Operation (except [XR] equipment)
When you start playback from a source component, the input selector
on this unit switches to that component automatically.
Synchronized Recording (except [XR] equipment)
Lets you synchronize recording with the start of playback when
recording from CD, MD or analog discs.
SWITCHING FROM [SL16] TO [XS8]
You can easily change the system control mode by adjusting the
position of the SYSTEM CONTROL switch on the rear panel.
Do this operation after completing all connections.
SL16 nl (XS8)
For (SL16] "For [xse}
¢ This operation will not effect items stored in the memory.
* After switching the system control mode. turn the power off and
unplug the power cord from the wall outlet, then plug it back.
Registering setup codes for KENWOOD audio components
(RC-R0607 and RC-RO507 only)
* Once you finish making the system connections, be sure to register
the appropriate setup code for each component. RC- 3.
* If you own remote controllable KENWOOD audio components that
are not compatible with system control {or cannot be combined with
your other system contral components), registering the setup code
enables you to control those components using the remote control
supplied with this unit (without connecting system contro! cords).
To register setup codes for your rémote controllable KENWOOD
audio components. see "Registering setup codes for other compo-
nents". RC- 2s.