Reebok PowerBike REM-11200 User Manual page 19

Reebok Fitness RB Bike Series – PowerBike
Place one Nylon Bushing (42) over the Handlebar (52) and secure with 2 x screws (43) using
Screwdriver (103). Repeat this procedure for the second Nylon Bushing (42) and secure with
2 x screws (43) using Screwdriver (103). Place spring (45) over the thread of the Adjustment
Knob (46) and then rotate the Adjustment Bracket front housing (47) over the rear housing
(40). Insert Handlebar Adjustment Knob (46) into the hole at the top of the rear housing.
Only screw the knob in a couple of turns - do not fully tighten as this will prevent you
from assembling the handlebar adjustment.
Thread the 2 EKG pulse wires through the hole in the left side of the Computer Upright (73)
and out of the top of the computer upright.
www.reebokfitness.co.uk
19
Issue 1 – August 2004