If installing a full-length expansion board, install the board retainer that was removed.
10.
Install the expansion slot cover retainer.
11.
Connect all necessary internal and external cables to the expansion board. For more information on
12.
these cabling requirements, see the documentation that ships with the option.
Install the air baffle (on page 20).
13.
Install the access panel (on page 19).
14.
Lock the tower bezel.
15.
Connect each power cord to the server.
16.
Connect each power cord to the power source.
17.
Power up the server (on page 16).
18.
Hardware options installation 48