Powering On And Selecting Boot Options; Registering The Server - HP ProLiant ML310e User Manual

V2 server
Hide thumbs Also See for ProLiant ML310e:
Table of Contents

Advertisement

Connect the Ethernet cable between the network connector on the server and a network jack.
a.
Press the Power On/Standby button.
b.
During server POST, press the F10 key.
c.
Complete the initial Preferences and Registration portion of Intelligent Provisioning (on page 68).
d.
At the 1 Start screen, click the Configure and Install button.
e.
To finish the installation, follow the onscreen prompts. An Internet connection is required to update
f.
the firmware and systems software.
Remote deployment installation—To deploy an operating system remotely, use Insight Control server
deployment for an automated solution.
For additional system software and firmware updates, download the HP Service Pack for ProLiant from the HP
website (http://www.hp.com/go/spp/download). Software and firmware must be updated before using
the server for the first time, unless any installed software or components require an older version. For more
information, see "Keeping the system current (on page 76)."
For more information on using these installation methods, see the HP website (http://www.hp.com/go/ilo).

Powering on and selecting boot options

Connect the Ethernet cable.
1.
Press the Power On/Standby button.
2.
During the initial boot:
3.
To modify the server configuration ROM default settings, press F9 when prompted from the start up
o
sequence to enter the RBSU. By default, RBSU runs in the English language.
If you do not need to modify the server configuration and are ready to install the system software,
o
press F10 to access Intelligent Provisioning.
NOTE:
controller defaults to a RAID configuration based on the size and number of drives installed. For
more information on modifying the controller default settings, see the documentation on the
Documentation CD.
For more information on automatic configuration, see the HP ROM-Based Setup Utility User Guide on the
Documentation CD or the iLO Management Engine Information Library
(http://www.hp.com/go/ilomgmtengine/docs).

Registering the server

To experience quicker service and more efficient support, register the product at the HP Product Registration
website (http://register.hp.com).
If an HP Smart Array controller has been added or is embedded in the system, the
Setup 27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant ml310e gen8 v2

Table of Contents