Smeg ALFA 150 User Instructions page 12

5.5 Preheating with delayed start
The program with delayed preheating is set as follows:
• Turn the knob to the
• Press the "PUSH" button for at least 3 seconds; the display shows the
current time flashing.
• Turn the knob to the
• Press the "PUSH" button; the display will show the minutes flashing.
• Turn the knob to the
• Press the "PUSH" button; the display will show the temperature flashing.
• Turn the knob to the
• Press the "PUSH" button; the display will show the cooking start time
flashing.
• Turn the knob to the
• Press the "PUSH" button; the display will show the minutes flashing.
• Turn the knob to the
• Press the "PUSH" button to exit from the data setting and saving phase.
"PEnd" appears on the display and after 3 seconds it will display P40, the
temperature and the preheating start time in succession.
• To start the program press the "START" button for at least 2 seconds. The
display will show the current time and "P40A" until the program is activated
at the set time.
The oven will perform preheating at the set time; during this phase the display
shows "P40", "InF" and the set temperature in succession: the temperature will
be kept constant until it is interrupted by the "STOP" button.
The program must be activated every day. To reactivate it, set the P40 function
and press the "START" button for at least 2 seconds.
34
Instructions for the user
or
or
or
or
or
or
symbol to select the "P40" program.
symbol to set the current time.
symbol to set the minutes.
symbol to set the temperature.
symbol to set the preheating start time.
symbol to set the minutes.