Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Smeg Manuals
  4. Oven
  5. ALFA135BE
  6. Instruction manual

Smeg ALFA135BE Instruction Manual

Smeg electric oven instruction manual
Hide thumbs

Advertisement

Quick Links

Download this manual
1.
PRECAUTIONS FOR SAFETY AND USE _____________________ 19
2.
INSTALLING THE OVEN __________________________________ 21
3.
DESCRIPTION OF CONTROLS ____________________________ 23
4.
USING THE OVEN _______________________________________ 24
5.
CLEANING AND MAINTENANCE ___________________________ 29
6.
EXTRAORDINARY MAINTENANCE _________________________ 31
INSTRUCTIONS FOR THE INSTALLER: these are intended for the
qualified engineer who is to install, commission and test the appliance
INSTRUCTIONS FOR THE USER: these provide recommendations for
use, a description of the controls and the correct procedures for cleaning
and maintaining the appliance.
18

Table of Contents

Advertisement

loading

Related Manuals for Smeg ALFA135BE

Summary of Contents for Smeg ALFA135BE

  • Page 1: Table Of Contents

    PRECAUTIONS FOR SAFETY AND USE _____________________ 19 INSTALLING THE OVEN __________________________________ 21 DESCRIPTION OF CONTROLS ____________________________ 23 USING THE OVEN _______________________________________ 24 CLEANING AND MAINTENANCE ___________________________ 29 EXTRAORDINARY MAINTENANCE _________________________ 31 INSTRUCTIONS FOR THE INSTALLER: these are intended for the...

  • Page 2: Precautions For Safety And Use

    1. PRECAUTIONS FOR SAFETY AND USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. TAKE GOOD CARE OF IT AND KEEP IT TO HAND THROUGHOUT THE OVEN'S LIFE CYCLE. WE URGE YOU TO READ THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING THE OVEN.
  • Page 3 SHOULD ALWAYS BE WORN. THE NAMEPLATE WITH THE TECHNICAL DATA, SERIAL NUMBER AND MARK IS IN A VISIBLE POSITION ON THE SIDE OF THE OVEN. THIS NAMEPLATE MUST NEVER BE REMOVED. THE APPLIANCE IS DESIGNED FOR PROFESSIONAL USE BY TRAINED STAFF.

  • Page 4: Installing The Oven

    EEC DIRECTIVES. Electrical connection Check that the power supply voltage and size are as specified on the nameplate on the side of the oven. This nameplate must never be removed. The oven is fitted with a H07RN-F three-core cable for operation at 240-240V∼.
  • Page 5 2.1.1 Safety thermostat The oven is fitted with a safety device tripped in case of a serious malfunction. To reset the safety device, call the after-sales service. The manufacturer declines all responsibility for injury or damage caused by failure to comply with the above regulations or deriving from tampering with even just one part of the appliance.

  • Page 6: Description Of Controls

    Instructions for the User 3. DESCRIPTION OF CONTROLS START BUTTON Use this button to set the time when turning on the appliance for the first time or after a power failure, edit programs and start cooking cycles. It also selects the operating power.

  • Page 7: Using The Oven

    N.B. This power setting operation only has to be carried out the first time the oven is connected. The value set is saved and automatically used whenever the oven is switched on after this. To modify this setting or the time, press START + STOP together to return to the point described in...
  • Page 8 Instructions for the User Program selection This oven has 15 different cooking programs, including: 14 user-editable programs for fan-mode cooking (P1 to P14); 1 manual editable program for fan-mode cooking ( The following table shows the parameters for each program.
  • Page 9 10 minutes, after which it will start to drop for a period up to a maximum time of 20 minutes, counted from when the beep sounded. After this the oven switches off).
  • Page 10 Release STOP and preheating will start automatically after 5 seconds; the oven will preheat to the set cooking temperature. N.B. – When the cooking process is over, to repeat the same program do not turn the knob and press START again.
  • Page 11 STOP key. 4.10 Key to the oven's beep sounds All the beep sounds the oven emits are different from each other, in order to allow the user to identify exactly what the oven is doing. Parameter setting/modification menu = 1 single beep End of preheating and pause before start of cooking = 5 beeps followed by a pause of 2 seconds.

  • Page 12: Cleaning And Maintenance

    Instructions for the User 5. CLEANING AND MAINTENANCE Important: never point jets of water straight at the oven and do not use high- pressure water cleaners. Before carrying out any operation, disconnect the oven from the electricity supply. Cleaning stainless steel To keep stainless steel in good condition, it must be cleaned regularly at the end of each day, after allowing it to cool.
  • Page 13 Instructions for the User Cleaning the inside of the oven To keep the oven in good condition, it must be cleaned regularly at the end of each day, after allowing it to cool. Remove all removable parts. Remove the side runners by removing the hook "C" from the hole or pin "D"...

  • Page 14: Extraordinary Maintenance

    Instructions for the User 6. EXTRAORDINARY MAINTENANCE Occasionally, the oven will require minor servicing procedures or the replacement of parts subject to wear and tear, such as gaskets, light bulbs, etc. The specific operations for each procedure of this kind are provided below.
  • Page 15 Oven door gasket To allow thorough cleaning of the oven, the door gasket can be removed. Before removing the gasket, remove the oven door as described above. Once the door has been removed, lift the tangs at the corners as shown on the right.