Advertisement
Quick Links
1.
INSTRUCTIONS FOR SAFE AND PROPER USE_______________ 15
2.
INSTALLATION OF THE OVEN_____________________________ 17
3.
DESCRIPTION OF CONTROLS ____________________________ 19
4.
USE OF THE OVEN ______________________________________ 20
5.
CLEANING AND MAINTENANCE ___________________________ 22
6.
EXTRAORDINARY MAINTENANCE _________________________ 24
INSTRUCTIONS FOR THE INSTALLER: these are intended for the
qualified technician who must install the appliance, set it functioning
and carry out an inspection test.
INSTRUCTIONS FOR THE USER: these contain user advice,
description of the commands and the correct procedures for cleaning
and maintenance of the appliance.
14
Contents
Advertisement
Related Manuals for Smeg ALFA161X
Summary of Contents for Smeg ALFA161X
-
Page 1: Table Of Contents
INSTRUCTIONS FOR SAFE AND PROPER USE_______________ 15 INSTALLATION OF THE OVEN_____________________________ 17 DESCRIPTION OF CONTROLS ____________________________ 19 USE OF THE OVEN ______________________________________ 20 CLEANING AND MAINTENANCE ___________________________ 22 EXTRAORDINARY MAINTENANCE _________________________ 24 INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified technician who must install the appliance, set it functioning and carry out an inspection test. -
Page 2: Instructions For Safe And Proper Use
Introduction 1. INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE OVEN. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE OVEN. - Page 3 NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN: THEY COULD BE ACCIDENTALLY LIGHTED AND CAUSE FIRES. THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME IS LOCATED IN AN EXPOSED POSITION AT THE REAR OF THE OVEN. THE PLATE MUST NOT BE REMOVED. APPLIANCE APPROPRIATELY TRAINED PERSONNEL.
-
Page 4: Installation Of The Oven
Instructions for the installer 2. INSTALLATION OF THE OVEN The oven must be set up on a perfectly flat surface and left standing free. Make sure to allow enough room at the back for easy access to the terminal strip for connection of the power cable to mains. Installation must be carried out by a qualified technician in compliance with applicable regulations in force. - Page 5 Instructions for the installer If connecting by plug and socket, make sure to use a 25 Amp. three-core plug or a 16 Amp. five-core plug in case of operation at 380-415V2N∼ or 380-415V3N∼. Make sure that plug and wall socket are of the same type and are in conformity with regulations in force.
-
Page 6: Description Of Controls
Instructions for the user 3. DESCRIPTION OF CONTROLS All oven knobs and controls are located on the side panels. TIMER KNOB This permits to select manual or timer-controlled cooking with automatic turning off of the oven at end of the cooking cycle. To set to manual, turn the knob anticlockwise to To set cooking time, turn the knob clockwise. -
Page 7: Use Of The Oven
Instructions for the user cycle, the light comes on and goes off various times signalling that the temperature in the oven is being kept constant as per the set value. This permits selection of the ideal cooking temperature. Rotate clockwise to the desired temperature (50° to 250°C). Adjustment is progressive so that the oven also operates at any intermediate value. - Page 8 Instructions for the user 4.3 Defrosting TIMER KNOB SET TO MANUAL FUNCTION SWITCH THERMOSTAT SWITCH Moving air at ambient temperature causes frozen food to quickly thaw. This type of thawing is ideal as the taste and appearance of the de- frozen food, whether previously deep-frozen or frozen in the domestic freezer, remain unaltered.
-
Page 9: Cleaning And Maintenance
Instructions for the user 5. CLEANING AND MAINTENANCE Important: never spray water directly on to the oven. Never use pressure nozzles. Before any intervention, disconnect the power supply of the oven. 5.1 Cleaning stainless steel parts To maintain stainless steel parts in perfect condition, clean regularly at the end of the work day. - Page 10 Instructions for the user 5.2 Cleaning the inside of the oven To maintain the oven in perfect condition, clean it regularly at the end of the work day. Allow to cool first. Take off all removable parts. Remove the side guides by lifting them up from the front; slide them out of the rear hole and take off.
-
Page 11: Extraordinary Maintenance
Instructions for the user 6. EXTRAORDINARY MAINTENANCE The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations. Before any intervention, disconnect the power supply of the oven. 6.1 Replacing the light bulb Remove protection cover A using a screwdriver to pry open.