Table of Contents
Advertisement
Monitor Driver Installation
Driver installation for Windows 95 or Windows 98
To use the Plug and Play feature in Microsoft®Windows®95 or
Windows 98, files should be loaded from the Monitor CD.
1.
Turn off the computer and all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow the system to
boot into Windows 95 or Windows 98.
Your computer's Plug and Play code may warn you that your system
hardware has changed. This means that it has detected your new
monitor for the first time.
4.
Open the
CONTROL PANEL
5.
Click the
• In case of Windows 95 :
6
1.
-
Click the
2.
Click the
• In case of Windows 98 :
6
1.
-
Click the
2.
Click the
3.
Open the
CHANGE
4.
Click the "Display a list of the known drivers for this device so that
I can choose a specific driver" and then select the
7.
Insert the Monitor CD into the CD drive: and click the
button.
8.
Click OK.
9.
Ensure that the CD drive letter is selected.
10.
Choose E50 monitor and Click OK. The files will be copied from
the CD to your hard disk drive.
11.
Close all open windows and remove the CD.
12.
Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
DISPLAY PROPERTIES
and then double - clicking on the
tab.
SETTINGS
CHANGE DISPLAY TYPE
CHANGE MONITOR TYPE
button.
ADVANCED
tab.
MONITOR
UPGRADE DEVICE DRIVER WIZARD
button and then select the
window by clicking
button.
button.
window by clicking on
button.
NEXT
A4
,
,
START
SETTINGS
icon.
DISPLAY
button.
NEXT
HAVE DISK
Advertisement
Table of Contents
