Table of Contents
Advertisement
Monitor Driver Installation
Driver installation for Windows 2000 or Windows Me
To use the Plug and Play feature in Microsoft Windows 2000 or
Microsoft Windows Millennium Edition(Me) files should be loaded
from the Monitor CD.
1.
Turn off the computer and all attached devices.
2.
Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow the system to
boot into Windows 2000 or Windows Me.
4.
Open the
CONTROL PANEL
5.
Click the
6.
Click the
7.
Click the
8.
Click the
9.
Click the
10.
Open the
and then Click the
DRIVER
11.
Select the "Display a list of the known drivers for this device so that I
can choose a specific driver" and then Click the
12.
Insert the Monitor CD into the CD drive: and click the
button.
13.
Click OK.
14.
Ensure that the CD drive letter is selected.
15.
Choose E50 monitor and Click OK. The files will be copied from
the CD to your hard disk drive.
16.
Close all open windows and remove the CD.
17.
Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
DISPLAY PROPERTIES
and then double - clicking on the
tab.
SETTINGS
button.
ADVANCED
tab.
MONITOR
button.
PROPERTIES
tab.
DRIVER
UPGRADE DEVICE DRIVER WIZARD
NEXT
window by clicking
window by clicking on
button.
A5
,
,
START
SETTINGS
icon.
DISPLAY
UPDATE
button.
NEXT
HAVE DISK
Advertisement
Table of Contents
