Monitor Driver Installation; Driver Installation For Windows 95 Or Windows 98 - IBM 6517-6LN E74M User Manual

Monitor Driver Installation

Driver installation for Windows 95 or Windows 98

To use the Plug and Play feature in Microsoft®Windows®95 or
Windows 98, files should be loaded from the IBM Monitor CD.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3.
Turn on the monitor and then the system unit. Allow the system to
boot into Windows 95 or Windows 98.
Your computer's Plug and Play code may warn you that your system
hardware has changed. This means that it has detected your new
monitor for the first time.
4.
Open the
DISPLAY PROPERTIES
CONTROL PANEL
5.
Click the
SETTINGS
• In case of Windows 95 :
6 1.
- Click the
CHANGE DISPLAY TYPE
2.
Click the
CHANGE MONITOR TYPE
• In case of Windows 98 :
6 1. Click the
-
ADVANCED
2. Click the
MONITOR
3. Open the
UPGRADE DEVICE DRIVER WIZARD
button and then select the
CHANGE
4. Click the "Display a list of the known drivers for this device so that
I can choose a specific driver" and then select the
7. Insert the IBM Monitor CD into the CD drive: and click the
button.
8. Click OK.
9. Ensure that the CD drive letter is selected.
10.
Choose IBM E74M monitor and Click OK. The files will be copied
from the CD to your hard disk drive.
11.
Close all open windows and remove the CD.
12.
Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
window by clicking
and then double - clicking on the
tab.
button.
button.
button.
tab.
A4
,
START SETTINGS
icon.
DISPLAY
window by clicking on
button.
NEXT
NEXT
,
button.
HAVE DISK