Sierra Wireless AirCard 800 Series Installation Manual page 25

Configure your account
Rev 1.2 May.07
address(es), select the
and skip to Step 10.
Launch after connecting
6. Select the
down list, select which application, if any, you want
Watcher to automatically launch when a connection is
established with this profile:
None
· —No application is autolaunched.
Browser
· —Watcher autolaunches your default Internet
browser.
MS VPN
· —Watcher autolaunches a Virtual Private
Network (VPN) connection.
Application
· —Watcher autolaunches an installed VPN
program, or any other program.
7. Complete the appropriate field, depending on the option
Launch after connecting
you chose in the
· If you selected Browser—in the
for the web site you want to view on connection (such as
www.sierrawireless.com).
· If you selected Microsoft VPN—in the
(PPTP) connection
the drop-down list.
· If you selected Application—in the
enter the path to the program or use the browse button
to locate the .exe file for the software application you
want to autolaunch.
8. If your service provider has given you an IP address, in the
Advanced
folder, click
address in the field below. Otherwise select
(This is the default because most networks use dynamic IP
addressing.) Use the data compression or IP header
compression fields if supported by your service provider.
Use IP header compression
Note: Do not select the
service provider is using this compression. The AirCard USB modem
cannot maintain a connection if this is enabled but not supported on
the network.
9. If you have a DNS address or addresses, click
and enter the address(es). (In most cases, it is not necessary
to enter a DNS address.)
10. If you have more than one profile, select
Default Profile
field, choose the default profile from the
drop-down list. (The "default" profile is the one used by
the autoconnect feature, if selected, and is also used if you
Connect
click without selecting a profile.)
Advanced
folder. Otherwise, click
field, and from the drop-
field:
URL
field, type the URL
Microsoft VPN
field, select the VPN connection from
Application
TCP/IP Static IP
. Select
Profiles
OK
field,
and enter the
Dynamic IP
.
field unless your
DNS Settings
, and in the
25