Receiving A Geographical Area Call - Icom IC-M504A Instruction Manual

D Receiving a Geographical Area Call
When a Geographical Area Call (for the area you are in) is
received:
Emergency alarm or beeps sound depending on the re-
ceived category.
"Received Geographic" appears on the display.
" " and the LCD backlight blink.
Push [CLR] to stop the beeps and the backlight blinking,
then push
fied by the calling station for voice communication; push
other key to ignore the call.
" " continues to blink.
Monitor the selected channel for an announcement from
the calling station.
25W
TAG
Received
Geographic
<Osaka Bay
<CLR ˘
Beep Off>
When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all Geographical Area
Calls are received, regardless of your position.
to change to the channel speci-
INT
SAFETY
D Receiving a Position Request Call
When a Position Request Call is received:
The beeps sound.
"Received POS Request" appears on the display.
" " and the LCD backlight blink.
Push [CLR] to stop the beeps and the backlight blinking,
then push
ignore the call.
" " continues to blink.
25W
TAG
Received
POS Request
<Paul
<CLR ˘
Beep Off>
DSC OPERATION
to reply to the call; push [CLR] to
INT
SAFETY
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
39