Dsc Address Id - Icom IC-M504A Instruction Manual

6
DSC OPERATION

DSC address ID

A total of 100 DSC address IDs can be programmed and
named with up to 10 characters.
D Programming Individual ID
q Enter "Add:INDV ID" in the DSC Set up menu.
DSC Menu
(Push [MENU])
w Rotate [DIAL] to input the individual ID and ID name.
to move the cursor forward, or
I/C] to move it backward.
[CLR] to cancel and return to the DSC Set up menu.
"Full ID" appears when 100 DSC address IDs are already set.
edit the ID name.
The first digit is specified as '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
Add:Individual ID
Input 9 digits
_________
Input name
_________
<CLR ˘ Exit / ENT ˘ OK>
e After inputting the ID name, push
r Push [CLR], or rotate [DIAL] to select "Exit" then push
, to return to the DSC menu.
r again to return to the normal operating mode.
16
Set up Add:INDV ID
(Rotate [DIAL], then push
or
--DSC Menu--
to program.
D Deleting Individual ID
q Enter "DEL:INDV ID" in the DSC Set up menu.
DSC Menu
(Push [MENU])
this case, push [CLR] to exit.
.)
w Rotate [DIAL] to select the desired ID name to delete.
Select ID
John
Paul
˘George
Michael
to
<CLR ˘ Exit / ENT ˘ OK>
e Push
and return to the DSC Set up menu.
r Push [CLR], or rotate [DIAL] to select "Exit" then push
, to return to the DSC menu.
r again to return to the normal operating mode.
Set up DEL:INDV ID
(Rotate [DIAL], then push
No ID" is displayed. In
--DSC Menu--
to delete the selected individual ID
.)