Configuration Procedure - Huawei Quidway NetEngine 20 series Configuration Manual

2 Establishment of the Configuration Environment
Configuration Roadmap
1.
2.
3.
Data Preparation

Configuration Procedure

Step 1 Establish the physical connection as shown in
Step 2 Configure the AUX port to support the Modem dialup.
<Quidway> system-view
[Quidway] aaa
[Quidway-local-aaa-server] local-user huawei password cipher test1
[Quidway-local-aaa-server] local-user huawei service-type terminal
[Quidway-local-aaa-server] local-user huawei level 3
[Quidway-local-aaa-server] quit
[Quidway] user-interface aux 0
[Quidway-ui-aux0] authentication-mode aaa
[Quidway-ui-aux0] modem both
Step 3 Configure Modem parameters.
# Run the PC emulation terminal, refer to
Console
Press Enter on the PC emulation terminal/ terminal until a command line prompt of the
Modem such as
Configure the Modem to meet the requirements of AUX communication.
For details, refer to Modem descriptions.
Step 4 Log in to the router.
Enter the user name and password in the remote terminal emulation program.
After authentication, a command line prompt such as
Enter the command to check the running status of the router or configure the router.
Enter "?" for help.
For detailed operations, refer to the following chapters.
----End
2-12
Establishing the physical connection
Configuring Modem parameters
Configuring the AUX port to support the Modem dialup
Type of terminals
Terminal communication parameters
Modem communication parameters
Port.
appears.
>
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuration Guide - Basic Configurations
Figure 2-7.
Establishing the Configuration Environment by the
appears.
Quidway
Quidway NetEngine20/20E
Issue 05 (2010-01-30)