Huawei Quidway NetEngine 20 series Configuration Manual page 189

9 Telnet and SSH
010001
[client]
# Send the RSA public key generated on the client software to the server.
[Quidway] rsa peer-public-key RsaKey001
Enter "RSA public key" view, return system view with "peer-public-key end".
[Quidway-rsa-public-key] public-key-code begin
Enter "RSA key code" view, return last view with "public-key-code end".
[Quidway-rsa-key-code] 3047
[Quidway-rsa-key-code] 0240
[Quidway-rsa-key-code] BFF35E4B C61BD786 F907B5DE 7D6770C3 E5FD17AB
[Quidway-rsa-key-code] 203C8FCB BBC8FDF2 F7CB674E 519E8419 0F6B97A8
[Quidway-rsa-key-code] EA91FC4B B9E18836 5E74BFD5 4C687767 A89C6B43
[Quidway-rsa-key-code] 1D7E3E1B
[Quidway-rsa-key-code] 0203
[Quidway-rsa-key-code] 010001
[Quidway-rsa-key-code] public-key-code end
[Quidway-rsa-public-key] peer-public-key end
Step 6 Create an SSH user on the server.
The SSH client can be authenticated in four modes: password, RSA, password-RSA, and all.
# Configure the VTY user interface.
[Quidway] user-interface vty 0 4
[Quidway-ui-vty0-4] authentication-mode aaa
[Quidway-ui-vty0-4] protocol inbound ssh
[Quidway-ui-vty0-4] quit
# Configure the password authentication for the SSH user Client001.
[Quidway] ssh user client001
[Quidway] ssh user client001 authentication-type password
# Set the password of the SSH user Client001 to huawei.
[Quidway] aaa
[Quidway-aaa] local-user client001 password simple huawei
[Quidway-aaa] local-user client001 service-type ssh
[Quidway-aaa] quit
# Set the service type of Client001 to STelnet.
[Quidway] ssh user client001 service-type stelnet
[Quidway]
[Quidway] ssh user client002 authentication-type rsa
[Quidway] ssh user client002 assign rsa-key RsaKey001
9-40
If the password and password-RSA authentication is used, configure a local user of the same user
name.
If the RSA, password-RSA, and all authentication is used, the server must save the RSA public key
of the SSH client.
Create an SSH user Client001.
Create an SSH user Client002 set the authentication mode to RSA, and bind Client002 to
the RSA public key of the SSH client.
ssh user client002
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
Issue 05 (2010-01-30)