9 Telnet and SSH
Data Preparation
To connect the STelnet client to the SSH2 server, you need the following data:
No.
1
2
3
4
5
6
7
8
9
10
Configuration Procedures
No.
1
2
3
4
9.5.2 Enabling the First-Time Authentication on the SSH Client
Do as follows on the login router:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ssh client first-time enable
The first-time authentication on the SSH client is enabled.
----End
9-18
Data
Name of the SSH server
Number of the port monitored by the SSH server
Preferred encrypted algorithm from the STelnet client to the SSH server
Preferred encrypted algorithm from the STelnet server to the SSH client
Preferred HMAC algorithm from the STelnet client to the SSH server
Preferred HMAC algorithm from the STelnet server to the SSH client
Preferred algorithm of key exchange
Name of the egress
Source address
Name of the VPN instance
Procedure
Enabling the First-Time Authentication on the SSH Client
Configuring the SSH Client to Assign the RSA Public Key to the SSH Server
Enabling the STelnet Client
Checking the Configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway NetEngine20/20E
Configuration Guide - Basic Configurations
Issue 05 (2010-01-30)