Editing Area To Avoid - Toyota TNS350 Owner's Manual

6. Touch the eight directional touch-
screen button to move the cursor
to the desired point on the map.
7. Touch "Enter".
8. Touch either
the size of the area to be avoided.
9. Touch "OK".
INFORMATION
● If a destination is input in the area
to avoid or the route calculation
cannot be made without running
through the area to avoid, a route
passing through the area to be
avoided may be shown.
● Up to 10 locations can be registered
as points/areas to avoid. If there
are 10 locations already registered,
the following message will be
displayed: "Unable to register
additional points.
operation again
unnecessary points.".
or to change
Perform the
after deleting
ADVANCED FUNCTIONS

— Editing area to avoid

The name, location and/or area size of a
registered area can be edited.
1. Push the "MENU" button.
2. Touch "Setting" on the "MENU"
screen.
3. Touch "Memory" on the "Setting"
screen.
4. Touch "Edit".
5. Touch the desired area button.
4