Toyota TNS350 Owner's Manual page 247

OPTIONAL FUNCTION
NOTICE
● The range of the image may vary
depending on the vehicle and the
road conditions.
● There is a limit to the range of the
camera. Objects near the ends of
the bumper and under the bumper
cannot be seen.
● The rear image color may vary from
that of the actual objects.
● The image brightness and contrast
can be adjusted.
● Depending on the vehicle, the back
guideline may appear misaligned
on the left and right. This is not a
malfunction.
In the following situations, the screen
may be difficult to view. This does not
constitute a malfunction.
● In a dark area (such as at night)
● When the temperature near the
camera is high or low
● When raindrops are on the
camera lens or the humidity is
high (when raining)
● When foreign matter is near the
camera (such as mud)
● When the sun or a beam from
headlights strikes the camera
lens directly
● When a high−luminance point
strikes the camera (such as
the reflection of the sun's rays
on the chassis), a smear effect
typical of CCD cameras may
occur.
246 TNS 350
[Screen display]
High−luminance point
*Smear effect: A phenomenon where a vertical line
appears from a high−luminance
point striking the camera (such as
the reflection of the sun's rays on
the chassis).