Rear View Camera Image - Toyota TNS350 Owner's Manual

● Do not leave the unit in direct
sunlight for
time. Otherwise, a printed image
phenomenon may result.
● The images
illustrations are merely examples.
The range appearing
monitor screen varies depending
on the vehicle model.
● The instant the vehicle is put
in reverse, part of the monitor
will appear white then gradually
stabilize.
● Awhite vertical band will appear
when the camera is struck by light
from the sun, headlights or any
other strong light beam source.
This is called the smear effect.
● After having used the unit for a
long time, white scratches and
vertical lines may appear at high
temperatures, depending on the
features of the CCD.
● The 50 Hz power source range
fluorescent light
flickering in the screen. This is not
a malfunction.
● Because the rear view camera
uses a special lens, the image and
distance appearing on the screen
differs from the actual image and
distance.
long periods of
shown in the
on the
may cause
OPTIONAL FUNCTION

Rear view camera image

Shift into reverse gear.
● The rear image appears on the monitor
screen.
● If you shift out of reverse gear, the
display will return to the screen that
was displayed prior to the back camera
image (navigation, audio, blank screen,
etc).
7